Skip to product information
1 of 4
Damage Level 4

SKU 8188083994904


$6.50 /sq ft
One unit covers approximately 1000 sq ft of surface area.
Help Me Calculate
EDYSTON hydrogels give concrete structures the ability to withstand things like water damage, freeze-thaw cycles, salt corrosion and more.


DURYGEL works together with DENSYGEL (our core hydrogel that heals, seals and densifies deteriorated concrete) to optimize concrete cracking by targeting the impurities in the cracks at a molecular level and ultimately turning them into a rejuvenating gel that results in a longer concrete life cycle.


DURYGEL + DENSYGEL are designed to be used together to repair the following Damage Level...

When excessive concrete cracking leads to significant salt leaching, rusting, and deterioration.

Designed for surfaces with deicing salts and brines, wetting and drying from the irrigation system, freezing and thawing, and abrasive wear from foot and hard-wheeled traffic.

Shipping & Delivery

More Information

•These hydrogels are not concentrates, so do not add any water.

•Precautions must be taken to ensure that EDYSTON does not freeze, which can occur at 36° F.

•EDYSTON has a shelf life of 5 years from the time of production when stored under controlled, laboratory conditions.

View full details

The Root cause of concrete decay is in its molecular structure.

Our Solution: Hydrogels

How it works


Through a simple spray-on application, EDYSTON™ solution permeates and rejuvenates corroded concrete infrastructure. The solution access the damaged areas through any available pores, cracks, and voids.


The EDYSTON™ solution then interacts with the alkalis, sulfates, and other chemicals naturally present in the pore solution.


The interaction of these different chemicals creates a hydrogel that eventually forms C-S-H, the backbone of concrete strength.


The EDYSTON™ solution completes its transformation into C-S-H, bridging cracks and rejuvenating the porous concrete structure.

how to

Prep & Application

Prep & Application


Power Wash

Remove salt and weak concrete by power washing (3000–3500 psi). All contaminants must be removed for EDYSTON to contact the deteriorated concrete.



Allow washed surface to dry to a saturated surface-dry condition. (surface-dry needs hyphen)



Spray on DENSYGEL (125 sq ft per gallon max) and wait at least 10 minutes before applying additional applications. EDYSTON requires a minimum of 3 applications.